Nissan backs DeltaWing racecar, headed for Le Mans [w/video]

Filed under: Concept Cars, Motorsports, Videos, Nissan, Design/Style, Racing



The DeltaWing project now has two major corporate backers and, more importantly, an engine. Nissan and Michelin have signed on with the innovative project of designer Ben Bowlby, Dan Gurney's All-American Racers and Don Panoz. Now called the Nissan DeltaWing, the Japanese firm will provide a turbocharged, direct-injected 1.6-liter, four-cylinder with an output of around 300 horsepower. Known as DIG-T, the powerplant shares the same roots as the engine in the Nissan Juke.

That's about 200 hp down on the 510 horsepower developed by the diesel V6 in the Audi R18 e-tron Quattro and about half the horsepower developed by other LMP1 racers. However, Nissan says the engine is half the weight of a typical LMP1 motor, and paired with the DeltaWing's minimal aerodynamic drag, the lap times are said to be somewhere between those of the LMP1 and LMP2 classes. Why does this matter? Because Nissan and Co. are taking this needle-nosed baby to Le Mans.

Of call cars and classes, Nissan says this strangest looking effort is one that will "showcase the pioneering technology that will show one potential direction for the future of motorsport and will feed into the research and development of future technologies, that filter down to Nissan's road car product range."

The Nissan DeltaWing will be allowed to run in the 24 Hours of Le Mans following a special dispensation for an experimental car that doesn't follow any technical guidelines offered by ACO, the organizer of Le Mans. It will use Garage 56, it will wear Number 0, and won't be classified in the results. Even so, we'll be watching closely. Follow the jump for a video of the racecar's development and a press release detailing Nissan's involvement.Continue reading Nissan backs DeltaWing racecar, headed for Le Mans [w/video]

Nissan backs DeltaWing racecar, headed for Le Mans [w/video] originally appeared on Autoblog on Tue, 13 Mar 2012 11:01:00 EST. Please see our terms for use of feeds.



Permalink | Email this | Comments