1. We have moved to a new Forum System. Please let us know if you have any issues.
    Dismiss Notice

What did you do with your car today?

Discussion in 'Lounge' started by BankerBalt, Nov 12, 2011.

  1. Derrian

    Derrian Guest

    Nice!!
     
  2. derp

    derp New Member

    mean.

    probably isn't slow.
     
  3. cmspaz

    cmspaz New Member

    Damn near where my car sits for sure.

    The king of ricer math is currently running thrust by gear numbers, he's bored off his ass at work. I can cross-post them here if people want to see once I get them.
     
  4. Grappler

    Grappler <font color="#EF77A6">Super Moderator</font>

    King of ricer math?
     
  5. MNmazda6

    MNmazda6 New Member

    took off the winters put on the 19's. I just couldn't wait. big brakes next...
     
    Last edited: Mar 10, 2013
  6. MNmazda6

    MNmazda6 New Member

    HD Lip Kit





    Home Depot Lip Kit Boooooooy!!!!! :p :D
     

    Attached Files:

    Last edited: Mar 13, 2013
  7. 1Kris06

    1Kris06 Member

    Never seen it done on the side before. Be interesting to see it in person.
     
  8. Trogdor

    Trogdor New Member

    Got ass raped by the DMV for my tabs today.
     
  9. JohnnyT

    JohnnyT New Member

    What's it up to now? Don't think I've paid more than $50 since selling the MS6 haha. Old cars FTW!
     
  10. Trogdor

    Trogdor New Member

    I just paid $406 :(
     
  11. Grappler

    Grappler <font color="#EF77A6">Super Moderator</font>

    I could buy... an intercooler and a wideband cable for that much :p
     
  12. Lindahl#7

    Lindahl#7 Member

    I got quite a bit done on my soon-to-be turbo swap engine today.

    Started off looking at this today:
    [​IMG]

    Tore it down to this:
    [​IMG]

    Sludge in the blocked coolant passage to the intake manifold:
    [​IMG]

    Figured out how to mod this spot to accept the turbo oil drain, thanks to 82transam - lifesaver!
    [​IMG]

    Got my Atkins order today as well so I could reinstall some parts with new gaskets:
    [​IMG]

    Went out and spent hours searching around for nuts, bolts, O-Rings, hose to redo some of the lines, and some other necessities:
    [​IMG]

    Then I couldn't finish off the night without having this happen:
    [​IMG]

    [​IMG]

    [​IMG]

    So the lower intake manifold is now installed with a new gasket and new coolant o-rings and one new bolt. I'll be going to get a slightly longer bolt tomorrow since this one isn't as long as it should be. I was in a hurry since I only had 10 minutes to find it.

    Won't have time to work on the engine for a while but next on the list is:
    Correct bolt for intake mani
    Get my 1/8NPT oil filter sandwich gauge adapter installed
    Drill and tap the -SE front cover for the turbo oil drain install
    Grind the -SE front cover to fit with the TII water pump
    Get -SE oil pan installed
    Port S4 turbo wastegate to a safe size to prevent boost creep
    Inspect and install turbo with coolant lines and oil lines

    Looking forward to a few days off but I've enjoyed the time working on the car.

    If life gives you turbo'ed rotaries...:cool:
     
  13. cmspaz

    cmspaz New Member

    So could I.
     
  14. Trogdor

    Trogdor New Member

    So could I, but I had to pay my tabs instead.
     
  15. JohnnyT

    JohnnyT New Member

    Just for tabs?! Jesus tap dancing titty fucking christ!
     
  16. cmspaz

    cmspaz New Member

    Nonsense, the police can't enforce anything on what they can't catch. ;)
     
  17. Trogdor

    Trogdor New Member

  18. Grappler

    Grappler <font color="#EF77A6">Super Moderator</font>

    Moar Rotary awsomeness
     
  19. derp

    derp New Member

    probed stuff
     
  20. cmspaz

    cmspaz New Member

    Evo'd properly.
     

Share This Page